Precautions for installation of diffuse reflection

The installation precautions for diffuse reflection lightbox strips mainly include the following aspects:

1、 Preliminary preparation

Tool preparation: Ensure that necessary installation tools are prepared, such as hand drills, drills or scissors, screwdrivers, wrenches, etc. At the same time, wear personal safety protective equipment such as gloves and goggles to prevent injury during installation.

Material inspection: Before installation, check whether the diffuse reflector light strip, power adapter and other accessories are complete, and confirm that they have no mechanical damage, deformation, peeling, solder joint disconnection and other defects.

2、 Installation environment

Insulation and Fire Protection: Ensure that the back panel of the installed light strip is made of insulated and non flammable materials to avoid safety hazards such as electrical fires.

Ventilation and heat dissipation: The diffuse reflector light strip should be used in a dry and temperature appropriate space, and ensure good ventilation and heat dissipation inside the light box to extend the service life of the light strip.

3、 Installation steps

Power off operation: During the installation process, it is necessary to ensure that the power supply has been completely cut off to avoid electric shock accidents or product damage caused by live operation.

Fixed clamp: Use a drill or scissors to insert and fix the fixed clamp at the installation position of the light strip.

Place the light strip: Place the light strip on the clamp and cut or extend it as needed. Please follow the paper instructions and cutting video when cutting to avoid damaging the light strip.

Wiring: Connect the wires between the light strip and the power or drive circuit according to the wiring requirements. Ensure that the positive and negative poles of the light bar correspond to the positive and negative poles of the power supply, and use matching wiring terminals or insulating tape for fixing and insulation treatment.

Fixed light strip: After installation, adjust and fix as needed. You can use screws to fix the light strip on the clamp plate. When installing the screws, avoid pressing them on the PCB board circuit or causing wire breakage and leakage.

4、 Safety and Maintenance

Anti static: During installation, pay attention to anti-static measures and avoid touching sensitive components such as PCB boards without static protection.

Do not touch: Do not touch the light board or wire connection points with your hands when the product is working and lit up, to prevent electric shock or damage to the product.

Regular maintenance: Regularly check the working status of the light strip, and promptly handle any abnormalities found. During maintenance, live operation should also be prohibited, and power connection wires should not be cut off arbitrarily.

5、 Other precautions

Voltage range: Ensure that the input voltage of the light strip is within the specified range (such as AC90-265V or DC12V/24V, etc.), to avoid damage to the light strip due to high or low voltage.

Waterproof treatment: For light boxes used outdoors or in humid environments, waterproof diffuse reflective light strips should be selected and properly waterproofed.

Follow instructions: During the installation process, it is necessary to follow the instructions in the product manual to avoid damage to the light strip or safety accidents caused by improper operation.

In summary, the installation precautions for diffuse reflection lightbox strips involve multiple aspects such as preparation, installation environment, installation steps, safety, and maintenance.